| Beam Loading - UDL On Beam |
Specify a uniform dead load applied over the length of the grade beam, in the selected units.
For example, this may be the weight of a wall load over the beam.
|
| Min / Max Depth |
Enter the range of beam depth permissible for design, in the selected units. The design process will begin with the minimum depth and iterate designs up to and including the maximum depth specified.
Note: Beam depth is taken from top of grade beam to bottom of spread footing.
|
|
Beam Width
|
Width of the beam above the spread footing, in the selected units.
|
| Min / Max Bars Size (Main Bar) |
Specify the range of permissible longitudinal reinforcing bar sizes.
|
| Min / Max Bars Size (Stirrup) |
Specify the range of permissible stirrup sizes.
|
|
Stirrup Type
|
Select the number of stirrup legs present in a cross section.
|
| Min / Max Spacing of Stirrup |
Specify the permissible range of stirrup spacing, in the selected units.
|
|
< Previous
|
Steps the Wizard to the previous step.
|
|
Next >
|
Proceeds the Wizard to the next step.
|
|
Cancel
|
Exits the Wizard without creating a new Combined Footing Job.
|
